The Toyota Tacoma tail lights have been constantly evolving and improving since their inception. In the early days, its taillight design was more traditional and focused on functionality. With the passage of time, around 2005, tail lights became more stylish in design, with improved brightness and visibility. Since 2015, the taillights have incorporated more modern elements, such as using LED light sources, which not only enhance the lighting effect but also improve the overall aesthetics of the vehicle. These continuous improvements have made the Tacoma taillights more functional and aesthetically pleasing. With the use and passage of time, replacing taillights has become an important part of maintaining vehicles. In this article, we will tell you how to replace Toyota Tacoma tail lights, which is suitable for the 2015 Toyota Tacoma Tail Light and the 2017 Toyota Tacoma Tail Light.

how to replace Toyota Tacoma tail lights

(1) Preparation work

Before replacing the tail light, you need to prepare the following tools: a screwdriver, gloves, and a clean cloth. In terms of environment, operations should be carried out in dry, well-ventilated, and flat areas. At the same time, the following precautions should be taken: the vehicle should be turned off and in a cool state to avoid burns. Be careful and cautious during the operation to avoid damaging vehicle components.

(2) Disassembly steps

Firstly, open the trunk of the vehicle and locate the interior panel corresponding to the taillights. Carefully unscrew the screws securing the interior panel with a screwdriver and gently remove the interior panel. Next, you will see the wiring harness plug of the tail light. Carefully unplug the plug and be careful not to pull the wire forcefully. Then, find the screws or buckles that secure the taillights and use a screwdriver to loosen them. Finally, gently push the taillights to detach them from their installation position.

(3) Install new taillights

Align the new taillights with the installation position to ensure accurate positioning. Fix the screws or buckles to ensure a secure installation. Plug in the wiring harness plug of the tail light to ensure a tight connection. After installation, turn on the vehicle lights and check if the new taillights are functioning properly, including brake lights, turn signals, etc. Ensure that the brightness of the lights is normal, without flickering or abnormal conditions.

General precautions for replacing Toyota Tacoma taillights

(1) Light bulb selection

Make sure to select the correct model when replacing the Toyota Tacoma taillight bulb. Check the user manual of your vehicle, or drop by any reputable auto parts supplier for further assistance in case you are confused as to what kind and size of light bulb will fit well with your car. Simultaneously, we should also focus on the good quality of light bulbs and select products from reputable brands. With this type of light bulb, a longer life and brighter and more stable lighting are achieved.

(2)Operating standards

You have to follow the rules of replacing taillights when changing taillights and must operate strictly. Please note that when using the corresponding tools, such as a screwdriver, pay attention to force and angle so as not to scratch the body or damage the tail light components. Meanwhile, relatively gentle disassembly is also a prerequisite to avoid the deformation or even breakage of parts around when removing and installing taillights.

(3)Testing and Adjustment

A light test should be carried out after fitting the new taillights. Left-right turn signal, brake light part can use lighting switch and so on, and then check the new taillight is shiny, color and flash normal. Any irregularities found should be corrected immediately. If the brightness of the light is too low, it may be a problem with an incorrect installation spring position and it needs to be reinstalled; if the color does not match,  take off and replace it. The  LED taillights have to be tested and refined several times in order for the newly installed tail light components to function properly so that they can keep pace with safety while riding.

In summary, replacing the tail light requires proper tools, careful operation in a suitable environment, adherence to procedures, choice of high-quality bulbs, and thorough testing and adjustment. For reliable Toyota Tacoma tail light suppliers or Prado tail light suppliers, consider GELING. GELING, with its high-quality products and excellent service, provides top-notch tail lights for your vehicle, ensuring safety and enhancing your driving experience.